POWER RAIZOR Assembly – without Grinder or diamond blade. For large format tiles.
NOTE: does not come with the grinder or the diamond blade.
The Raimondi POWER RAIZOR Cutting System is suitable for cutting large tiles or slabs up to a maximum length of 332cm or greater when used with the RAIZOR CUTTING system. The POWER RAIZOR requires a grinder and a diamond blade 125mm diameter and can also be used to bullnose tiles 6mm or 10mm thick when used with a suitable bullnose wheel for sale separately.
The Raimondi POWER RAIZOR enables the cutting of thicker tiles as well as taking a bullnose attachment for tiles either 6mm or 10mm thick. (available soon, get in touch if you need them) - [email protected]
The assembly can be adjusted to cut the following angles;
Cutting depth, 20mm at 90° or 16mm at 45° or 180°.
The system is used in combination with the RAIZOR CUTTING system.
When used with the RAIZOR cutting system, it can achieve cutting lengths up to a maximum length of 332cm. Cutting length can be increased to over 4LM by adding extensions.Contractors must ensure that products are fit for purpose - if in doubt, please get in touch
Please note delivery prices are as accurate as possible at time of ordering, however this cost may be subject to change at any time due to weight/volume, fuel surcharges, currency changes and location.
Please let us know about any access restrictions at the delivery/check-out stage as failure to provide information may delay your order or incur extra delivery costs.
The administration team will contact you should any issue arise concerning delivery charges. Contact Arbour Landscape Solutions for more information.
All materials are subject to availability at the time of order. The administration team will be in touch to arrange/advise of your delivery date.