Call 0208 953 6177

ALS Kerakoll Fugawash

 Fuga‑Wash Eco Eco‑friendly detergent to be used as an additive in water used to clean Fugalite® Eco, Fugalite® Eco Invisibile, Fugalite® Bio and... [ Read more ]
 0 reviews 




 Fuga‑Wash Eco

Eco‑friendly detergent to be used as an additive in water used to clean Fugalite® Eco, Fugalite® Eco Invisibile, Fugalite® Bio and Fugalite® Bio Parquet, ideal for use in GreenBuilding.

Fuga‑Wash Eco, when used as an additive in cleaning water, has a specific detergent action that does not damage ceramic tile, porcelain tile and natural stone surfaces.

  • Facilitates cleaning of covering materials.
  • Keeps the sponge cleaner.
  • Suitable for all surfaces.
  • 1.5 litre bottles
  • 100-200m2 per litre depending on area to be cleaned.
  • Normally available within 1 - 3 working days.
  • Always read instructions carefully before using & always test first on a sample or inconspicuous area.
How to use

Preparation of substrates

The coating materials must first be cleaned to remove any dust. Fugalite® Eco, Fugalite® Eco Invisibile, Fugalite® Bio and Fugalite® Bio Parquet must still be fresh.

Preparation

Fuga-Wash Eco is a ready-to-use transparent fluid that can be diluted with water in any ratio. Shake the bottle well before opening in order to redisperse the liquid evenly. Pour one measuring cap (approx. 50 ml) for every 5 litres of water in the cleaning tray.

Application

Begin cleaning the tilework when the grout is still fresh. On completion, pour Fuga-Wash Eco into the cleaning tray in the quantities indicated, then clean up the surface using a thick, large-sized damp sponge, preferably made of cellulose, to avoid removing grout from the joints. Use circular movements to soften the film of grout on the tiles and finish cleaning the joint surface. Specific high-dispersion polymers ensure all grout residues are removed using only a small amount of water. The use of an excessive amount of water when cleaning would impair the final chemical resistances. Rinse frequently and make sure clean water is used at all times, using appropriate trays and grills with cleaning rollers. If necessary, replace the sponge or felt cleaning pad when saturated with grout. Final cleaning should be done, by sponge applied in a diagonal directions to avoid material coming out from the joints. Wipe the cleaned surface again with a dry cloth to make sure it is completely clean and there are no streaks of resin remaining.

Cleaning

Residues of Fuga-Wash Eco can be cleaned from tools by rinsing them thoroughly. 

Contractors must ensure that products are fit for purpose - if in doubt, please get in touch

Please note delivery prices are as accurate as possible at time of ordering, however this cost may be subject to change at any time due to weight/volume, fuel surcharges, currency changes and location.
Please let us know about any access restrictions at the delivery/check-out stage as failure to provide information may delay your order or incur extra delivery costs.

The administration team will contact you should any issue arise concerning delivery charges. Contact Arbour Landscape Solutions for more information. [email protected]
All materials are subject to availability at the time of order. The administration team will be in touch to arrange/advise of your delivery date.

Reviews

No reviews were found.
Top