Sinai Pearl Beige Pre-Sealed Tumbled Edge Limestone Cobble Setts

Sinai Pearl Beige Limestone Cobble Setts

Product Information

• Light Acid Washed Surface Finish with Tumbled Edges
• 150mm wide x Free Lengths x 38-40mm deep
• Crate includes the following sizes, qty and coverage
• 150 x 200 x 38-40mm x 2.25m2/75no
• 150 x 250 x 38-40mm x 2.25m2/60no
• 150 x 300 x 38-40mm x 2.25cm/50no
• 150 x 400 x 38-40mm x 2.22m2/37no
• 8.97m2 coverage per crate
• Apprx weight 975kg per crate
• Minimum 3-5mm joint width recommended. Suggested 5-10mm pointing joint
• Factory Pre-Sealed with 2 coats of a sacrificial water based breathable sealer to reduce water absorption
• We suggest to order 10% for wastage
• Pendulum Test Value, 66 Dry, 31 Wet

Other Finishes Available 

• Brushed, Sand-Blasted Brushed & Sand-Blasted
• See attached PDF
• ​​​​​​Get in touch for more information/pricing

Good To Know & Important Information​​​

• Includes free delivery nationwide - weekday, anytime, kerbside delivery on flat ground included. (Pallet Pump Truck Off-Load)
• 1-3 working days lead time subject to stock levels at the time of ordering
• Pack sizes may occasionally vary
• Sizes are nominal
• All prices are ex VAT
• Bulk discount available - please talk to us about larger orders
• Fissures in stone are a natural part of the stone and are not considered flaws or defects. You can just admire them for making your stone project unique
• Please note limestone dust residue could be present within the crates, once the products are laid the dust should be easily removed with water, hard brush/pressure washing application
• We advise that all natural stone should ideally be laid on a permeable drain mortar with permeable jointing compounds, with a minimum joint width of 3mm and a minimum depth of 20mm, or alternatively with a semi-dry sharp sand and cement mix (4:1) with a suitable bonding bridge
• Please note that any stone samples supplied are intended to represent the range of surface finishes, textures, and colours. Samples should always be viewed under natural light that ideally replicates the environment of the in-situ product
• Whilst production processes are closely controlled, as a naturally occurring product, deviations do occur — both in the stone itself and in the resultant surface textures, finishes, and colours produced during manufacturing. For best results, we suggest that you mix paving between crates prior to installation
• Egyptian limestone paving has occasional inclusions of mineral deposits which may present rust spots. Therefore, we are unable to guarantee exact replication of any supplied samples
• Where an immediate order has been placed and no sample has been approved, Arbour Landscape Solutions cannot be held liable for any variation in colour, size, texture, or overall appearance
• Natural stone variations in colour, texture, and size, as well as blemishes and marks, are inherent characteristics and are outside the control of Arbour Landscape Solutions Ltd

Disclaimer

Thank you to all our clients for providing images of products we have supplied, sadly we can not individually thank each company on our website.

• Please note delivery prices are as accurate as possible at time of ordering, however this cost may be subject to change at any time due to weight/volume, fuel surcharges, currency changes and location.
• Please let us know about any access restrictions at the delivery/check-out stage as failure to provide information may delay your order or incur extra delivery costs.
• All materials are subject to availability at the time of order. The administration team will be in touch to arrange/advise of your delivery date.
• The administration team will contact you should any issue arise concerning delivery charges.
• Please allow enough material including wastage for your project(s)

Contact Arbour Landscape Solutions for more information.