Millboard Envello Board & Batten Cladding

Millboard Envello Cladding has the look and feel of traditional carpentry but with a vastly superior lifespan. Very little maintenance, UV stability and incredibly durable but, you would never know... [ Read more ]
 0 reviews 




Millboard Envello Cladding has the look and feel of traditional carpentry but with a vastly superior lifespan. Very little maintenance, UV stability and incredibly durable but, you would never know that this cladding is made from recycled materials.

Carefully moulded from selected timbers and coloured to perfection, Envello Cladding looks just like natural timber. Each board has a beautifully moulded profile to reduce wastage and make your life easier.

Available in four classic colours, Envello Cladding will not warp, twist or rot. The distinctive chamfered cut of the profiles enables the rain to wash the boards, dramatically reducing the need for manual cleaning. The boards lock together with a specially designed tongue and groove for added rigidity and increased installation speed. The tongue and groove has been profiled with a relief angle to allow the boards to curve when used vertically, as well as limiting the passage of air and water through the system. The tongue of the board features a notch which the fixings are aligned with, the next board then covers over the fixing creating a clean finish. These boards can be installed horizontally or vertically, depending on the nature of the design.
  • Decay Resistant.
  • Enviromentally Friendly.
  • UV and Weathering Stability.
  • Low Carbon Footprint.
  • Easy to Install.
  • No Warping or Rotting.
  • Lightweight.
  • Low Maintenance.
  • Moulded from Real Oak.
  • No Leeching or Staining.

Board Dimensions -
Length: 3600mm.
Width: 200mm.
Thickness: 28mm.
Width Installed: 181mm.
Boards per M2: 1.73 boards.
Colours include Antique Oak, Burnt Cedar, Golden Oak & Smoked Oak.


Order your Envello Cladding S/S Fixing (Box of 250) - FC20P250 3.5mm x 20mm For Accessories & FC30P250 3.5mm x 30mm For Boards.

Plas-Pro Cladding Support Batten
Battens used to fix all of the components to, including cladding boards, trims, corner trims and perforated closures.

Construction: Recycled plastic.
Size: 25x50x3000mm.


DELIVERY OPTIONS:-

Price includes Standard 4 working days service if ordered within time-frames. 
Next Day & Express 2/3 days service available, get in touch for more information.
Mainland Britain excluding Scottish Highlands. For other addresses a supplementary delivery charge will apply. POA
Anytime delivery 0730-1830hrs. Excludes Saturday, Sunday & Bank Holidays. 
Delivery Options Displayed When You Build Quotes or Check out.
Receiver to unload. Mechanical off-load charge automatically included in orders over £1200 + VAT.
Orders between £ 300.00 to £ 1,199.99 to be off-load by receiver. Failure to have sufficient man-power for receiver to unload may result in a failed or extra delivery charge of £200 + VAT.
Multiple/bulk orders get in touch

Contractors must ensure that products are fit for purpose - if in doubt, please get in touch


 

Please note delivery prices are as accurate as possible at time of ordering, however this cost may be subject to change at any time due to weight/volume, fuel surcharges, currency changes and location.
Please let us know about any access restrictions at the delivery/check-out stage as failure to provide information may delay your order or incur extra delivery costs.

The administration team will contact you should any issue arise concerning delivery charges. Contact Arbour Landscape Solutions for more information. [email protected]
All materials are subject to availability at the time of order. The administration team will be in touch to arrange/advise of your delivery date.

Reviews

No reviews were found.
Top