S-Tech Stone and Masonry Cleaner

3 reviews

S-Tech Stone and Masonry Cleaner is specifically designed for cleaning stubborn organic stains and deeply embedded dirt in porous stone and masonry.
Modern formulation.
With thanks to our customer Llewellyn Landscapes and Garden Design for the before and after photographs.

FREE DELIVERY TO MAINLAND UK

Benefits:

A revolutionary cleaner for stone & masonry.
Deep penetrating, foaming and lifting action.
7.5 pH - will not harm most stone and masonry substrates.
Fast acting formula.
Restores stone and masonry to its original look.
Ideal for historic preservation, historic buildings, monuments, tombstones, sculptures and other architectural surfaces.
A true labour saver.
For interior and exterior use.
Ready to use.

Pack Sizes
946 ml (1 Quart) single unit or pack of 12 x 946 ml
9.5 Litres (2.5 Gallons) single unit or pack of 2 x 9.5 litres
(USA Measurements)

How to use:

TEST PRODUCT ON A SMALL, INCONSPICUOUS AREA FIRST.

Stone & Masonry Cleaner can be applied with a pump sprayer, watering can or mop/brush. When applying, saturate the affected material, then agitate the substrate with a nylon bristle brush to generate a profuse foam. Reapply a light coat of Stone & Masonry Cleaner and let stand for 5 to 10 minutes. Agitate the substrate a final time and let stand for another 5 to 10 minutes. Use a clean water rinse to get the suspended dirt and debris away from the substrate. On deeply soiled materials an additional one or two applications may be necessary to restore the substrate to its original look. The full brightening effects will be seen within 24 hours as the surface dries.

Special note: Only add Stone & Masonry Cleaner to application equipment that is clean and free of dirt and debris. Additionally, never return unused material to the original container that the Stone & Masonry Cleaner came from.

Storage:

Store in a dry place at temperatures between 40°F (4.5°C) and 90°F (32°C). Store securely closed and upright in the original container. Do not store in direct sunlight as this will reduce the potency of the product.

Avoid shipping or storing below freezing or above 100°F. If product freezes, thaw at room temperature and shake gently to remix components. Store in a locked area inaccessible to children.

Precautions:

Do not take internally.
Apply when surface temperature is between 40 – 95 °F (5 – 35 °C).
Protect surrounding areas and clothing from product contact. Avoid contact with metals.
Keep away from plants, water and soil.
Once mixed, solution should NOT be left in a sealed container. It will continue to give off oxygen and the container may rupture and cause damage.
Dispose of all unused solution after 4 hours by pouring into a drain or toilet.
Wear suitable solvent resistant gloves, protective clothing and safety goggles during application.
Wash hands thoroughly after applying.

Safety directions:

WARNING: Causes serious eye irritation. Causes skin irritation. May cause respiratory irritation.

Prevention: Do not get in eyes, on skin, or on clothing. Wear protective gloves/protective clothing/eye protection/face protection. Avoid breathing fumes, mist, vapours, or spray. Use only outdoors or in a well-ventilated area. Wash hands thoroughly after handling. Keep out of reach of children.

Response: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Wash with plenty of water and soap. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell.

Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up.

Disposal: Dispose of contents/container in accordance with all local, state, and federal regulations.

For the cleaning and removal of mold stains, dirt and inanimate particulate. No claim is made by these products to prevent, destroy, repel or mitigate any living organism.

Contractors must ensure that products are fit for purpose - if in doubt, please get in touch

Please note delivery prices are as accurate as possible at time of ordering, however this cost may be subject to change at any time due to weight/volume, fuel surcharges, currency changes and location.
Please let us know about any access restrictions at the delivery/check-out stage as failure to provide information may delay your order or incur extra delivery costs.
The administration team will contact you should any issue arise concerning delivery charges. Contact Arbour Landscape Solutions for more information. [email protected]
All materials are subject to availability at the time of order. The administration team will be in touch to arrange/advise of your delivery date.

Technical Information

Safety Sheet

Reviews