Instant Stain Remover

A truly effective Instant Mould Stain Remover which is easy to apply and works within minutes. Targets ugly, embedded mould stains to quickly restore the original beauty of landscaping... Read more

0 reviews

DESCRIPTION

A truly effective Instant Mould Stain Remover which is easy to apply and works within minutes. Targets ugly, embedded mould stains to quickly restore the original beauty of landscaping materials.

Features

Works on wood and concrete substrates.
Ideally suited to mold stained attic sheathing and basement areas.
Targets and removes deeply embedded stains from mold and mildew*
Works within minutes of application.
No scrubbing required.
For indoor and outdoor use.

*No claim is made by this product to prevent, destroy, repel or mitigate any living organism.

FREE DELIVERY TO MAINLAND UK

How to Use

PRODUCT APPLICATION

Thoroughly clean away loose dirt, dust and grime
Wear appropriate PPE and protect surrounding materials such as rugs, furniture, lawns and edgings
Read the instructions on the packaging very carefully before starting work
Test the product on a small, discreet area first
Apply undiluted Instant Stain Remover. You will need a pump sprayer that is resistant to the corrosive effects of sodium hypochlorite, or a plastic watering can.
Average coverage is 18.5 - 46 m2 per 4.5 litre pack (200-500 sq. ft. per gallon) depending on substrate porosity.
Use a nylon bristle brush to agitate the stain remover into a foam
Let it stand for 5-10 minutes
Apply another light coat of the cleaner. Let it stand for another 5 - 10 minutes
Agitate the cleaner again and leave for a further 5-10 minutes
Rinse well with clean water and allow to air dry
Multiple applications may be required on heavily stained material.
The full effects will be seen once the area has fully dried
Never return unused material to the original container that the instant stain remover came from.

Pack Sizes
4.5 Litres (2.Gallons) single unit
(USA Measurements)

Storage:

Store in a dry place at temperatures between 40°F (4.5°C) and 90°F (32°C). Store securely closed and upright in the original container. Do not store in direct sunlight as this will reduce the potency of the product.

Avoid shipping or storing below freezing or above 100°F. If product freezes, thaw at room temperature and shake gently to remix components. Store in a locked area inaccessible to children.

Precautions:

Do not take internally.
Apply when surface temperature is between 40 – 95 °F (5 – 35 °C).
Protect surrounding areas and clothing from product contact. Avoid contact with metals.
Keep away from plants, water and soil.
Once mixed, solution should NOT be left in a sealed container. It will continue to give off oxygen and the container may rupture and cause damage.
Dispose of all unused solution after 4 hours by pouring into a drain or toilet.
Wear suitable solvent resistant gloves, protective clothing and safety goggles during application.
Wash hands thoroughly after applying.

Safety directions:

WARNING: Causes serious eye irritation. Causes skin irritation. May cause respiratory irritation.

Prevention: Do not get in eyes, on skin, or on clothing. Wear protective gloves/protective clothing/eye protection/face protection. Avoid breathing fumes, mist, vapours, or spray. Use only outdoors or in a well-ventilated area. Wash hands thoroughly after handling. Keep out of reach of children.

Response: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Wash with plenty of water and soap. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell.

Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up.

Disposal: Dispose of contents/container in accordance with all local, state, and federal regulations.

For the cleaning and removal of mold stains, dirt and inanimate particulate. No claim is made by these products to prevent, destroy, repel or mitigate any living organism.

Contractors must ensure that products are fit for purpose - if in doubt, please get in touch

Please note delivery prices are as accurate as possible at time of ordering, however this cost may be subject to change at any time due to weight/volume, fuel surcharges, currency changes and location.
Please let us know about any access restrictions at the delivery/check-out stage as failure to provide information may delay your order or incur extra delivery costs.
The administration team will contact you should any issue arise concerning delivery charges. Contact Arbour Landscape Solutions for more information. [email protected]
All materials are subject to availability at the time of order. The administration team will be in touch to arrange/advise of your delivery date.

Product Overview

Safety Sheet

Reviews

Similar products Often required with Instant Stain Remover

S-Tech Boost Stone & Masonry Cleaner

StainProof (TM) Waterbourne

S-Tech Stone and Masonry Cleaner

Hanafinn Oxy-Klenza

Hanafinn Eff-Erayza

Hanafinn Stain Repella

Pedalo Washboy & Accessories

H4 Waterproof Wood Protection