Sinai Pearl Beige Honed & Tumbled Surface Pre-Sealed, Limestone Square Setts

*FREE DELIVERY*

Sinai Pearl Beige Tumbled Limestone Setts (Factory Pre-Sealed) have been honed and tumbled with sawn edges to create a smooth sleek look.  Sinai Pearl Beige Limestone is a stone of immense character, available in the Sinai Pearl shade which is a gorgeous warm beige that looks truly stunning.
Use for paths, patios or as an edging. Compliments the Sinai Pearl Beige Limestone Paving. Sinai Pearl Beige Limestone has a beige background with natural glass – and/or quartz veins and sometimes many fossils.

Natural veining, occasional pitting, small chips on the edges and mottled colour variations enhance the natural beauty of this luxurious stone. Colour variations always occur to some extent, even in the same batch, carefully mix the tiles to achieve a harmonious appearance of colours and shades.

Rust marks may appear in the stone due to iron and mineral within the stone. This is not a fault. They maybe more visible when the tiles are wet, and may become lighter in colour after installation, in dry conditions and over time. The maximum acceptable percentage of rust marks is 10%. Do not use acid based cleaners on limestone paving.

Option Available.

• Sinal Pearl Beige, Honed Surface Finish with Tumbled Edges.135 x 135 x 38-40mm.
• Tolerance: +/- 3 mm on all sides.
• 500 per crate @1150kg.
• 9.1m2 coverage per pack, approx
• Approx 54 per m2.
• Minimum 3-5mm joint width recommended.
• Factory Pre-Sealed using a sacrificial water based breathable sealer.
• Includes delivery based on weekday, anytime, kerbside pallet line delivery. (Good access and flat surface essential for delivery). 
• Normally available within 1-3 working days subject to stock levels at the time of ordering.
• Natural stone will vary in colour, size, textures & finishes all part of the natural charachteristics of natural stone.
• Fissures in stone are a natural part of the stone and are not considered flaws or defects. You can just admire them for making your stone project unique.
• Please note limestone dust residue could be present within the crates, once the products are laid the dust should be easily removed with water, hard brush/pressure washing application.
• Pendulum Test Value, Shod Foot Test -  66 Dry / 31 Wet, Slip Risks-Dry-Low, Wet-Moderate) Bare Foot Test - 55 Dry/8 Wet, Slip Risks- Dry Low, Wet-High) 
  (This surface finish is Not suitable for bare foot traffic around swimming-pools. We can provide alternative surface finishes or surface treatments that will not alter the surface colour appearance, get in touch for more information)

Please note limestone when laid is a strong material, however it can be brittle and whilst we take measures to protect the stone as best we can, damages do unfortunately happen in transit. We will replace any slabs that arrive broken, but please handle with care.
We suggest to order 5% at the checkout to avoid potential delays on site.

WE ADVISE THAT ALL NATURAL STONE SHOULD BE IDEALLY LAID ON PERMEABLE DRAIN MORTAR WITH PERMEABLE JOINTING COMPOUNDS WITH MINIMUM 3MM JOINT WIDTHS & MINIMUM DEPTHS OF 20MM OR WITH A SEMI DRY SHARP SAND-CEMENT 4:-1 WITH SUITABLE BONDING BRIDGE.

PLEASE NOTE ANY STONE SAMPLES SUPPLIED ARE INTENDED TO REPRESENT THE RANGE OF SURFACE FINISHES, TEXTURES AND COLOURS.
THE SAMPLES SHOULD ALWAYS BE VIEWED UNDER NATURAL LIGHT, WHICH SHOULD IDEALLY REPLICATE THE ENVIRONMENT OF THE IN-SITU PRODUCT.
WHILST THE PRODUCTION PROCESSES ARE CLOSELY CONTROLLED, AS A NATURALLY OCCURRING PRODUCT, DEVIATIONS FROM THE MEAN DO OCCUR BOTH INTERMS OF THE NATURAL STONE ITSELF AND THE RESULTANT SURFACE TEXTURES, FINISHES AND COLOURS SUBSEQUENTLY PRODUCED DURING THE PRODUCTION PROCESS, THEREFORE WE ARE UNABLE TO GUARANTEE A REPLICATION OF THE SAMPLES PRODUCED.

WHERE AN IMMEDIATE ORDER HAS BEEN PLACED AND NO SAMPLE HAS BEEN APPROVED THEN ARBOUR LANDSCAPE SOLUTIONS ARE NOT LIABLE FOR ANY VARIATION IN COLOUR, SIZE, TEXTURE & OVERALL APPEARANCE.

NATURAL STONE COLOUR, TEXTURE, SIZE VARIATIONS, BLEMISHES-MARKS APPLY ALL OUTSIDE THE CONTROL OF ARBOUR LANDSCAPE SOLUTIONS LTD

PLEASE GET IN TOUCH TO DISCUSS SURFACE FINISHES AROUND SWIMMING POOLS, HOT TUBS ETC.

Disposal of all packaging/pallets is the responsibility of the customer. 

Deliveries to Scotland may be subject to surcharges - please contact us if you are in Scotland and your order exceeds £3,000

For bulk orders get in touch for more information.

Contractors must ensure that products are fit for purpose - if in doubt, please get in touch

Thank you to all our clients for providing images of products we have supplied, sadly we can not individually thank each company on our website.
 
Please note delivery prices are as accurate as possible at time of ordering, however this cost may be subject to change at any time due to weight/volume, fuel surcharges, currency changes and location.
Please let us know about any access restrictions at the delivery/check-out stage as failure to provide information may delay your order or incur extra delivery costs.
All materials are subject to availability at the time of order. The administration team will be in touch to arrange/advise of your delivery date.
The administration team will contact you should any issue arise concerning delivery charges.
Contact Arbour Landscape Solutions for more information. [email protected]